[emblem text]

To Be In Adjust for Clock on VCR Unit

To adjust the clock on your VCR is only necessary if the unit is first connected into the AC power outlet or when power is interrupted such as by a power failure when you connect your VCR to the AC power outlet for the first time or after a power inte rruption. The clock will indicate SUN 12:00 AM and flash. It is relatively easy for set the clock on your VCR with the correcting time by to following the directions of below.

[picture of results]

Before you are begin

Make sure your VCR is being connected to power source of power. You will not needing tools for which to perform this operations.

What to do

  1. Pushing the POWER button (a) to ON and the TIMER button (b) OFF. SUN 12:00 AM flashes.
    [picture of Step 1]
  2. Pushing the SELECT button (a) to once. Sun flashes. Press SET button (b) to setting for the day.
    [picture of Step 2]
  3. Pushing the SELECT button (a) to once. 12 AM flashes then pushing the SET button (b) to setting for the hours.
    [picture of Step 3]
  4. Pushing for the SELECT button (a) to once. 00 flashes pressing SET button (b) for which to setting for the day.
    [picture of Step 4]
  5. Pushing SELECT button and being for sure the present time which is display.
    [picture of Step 5]
  6. Repeating steps 2 through 5 if you entering the times correctly.
    [picture of Step 6]

Results

You VCR clocks now showing the correct times if your clock does not show the correct time. You are probably need to looking at our troubleshoots sections.